Checking which support options are available…
Who would you like help from?
Enter your name to begin your live chat with an online consultant.
What can we help you with?
Your details are used only to respond. MatzoBot requests are securely passed to the MatzoTech team.
Your request has been emailed to MatzoTech. A consultant will reply using the email address or mobile number you supplied.
UniFi Standard 24 PoE EU: 24 Gigabit RJ45 ports, 16 with 802.3af/at PoE output, a shared 95W budget and two 1G SFP interfaces in a managed 1U switch.
R8,949.00
Supplier has stock — 10 avail
Clear fulfilment, warranty and payment details.
Ubiquiti UniFi • USW-24-POE-EU
UniFi Standard 24 PoE combines 24 Gigabit copper connections and two 1G SFP interfaces in a fanless 1U switch. Sixteen RJ45 ports can power compatible devices, sharing a 95W PoE budget, while eight further ports connect ordinary data endpoints.
Ports with clear roles
Ports 1–16 provide 10/100/1000 Ethernet and 802.3af/at PoE output. Ports 17–24 are Gigabit data connections, and SFP ports 25–26 accept compatible 1Gbps Ethernet modules. These are 1G SFP interfaces rather than 10G SFP+ uplinks; choose the upstream design for the traffic the site needs.
PoE planning
The total available PoE is 95W. Ubiquiti lists per-port PSE ceilings of 15.4W in PoE mode and 32W in PoE+ mode, with lower power arriving at the endpoint after cable loss. Those port limits cannot all be supplied simultaneously. Add the connected devices’ requirements and leave suitable headroom before deploying cameras or access points.
Switching and segmentation
Manufacturer ratings are 52Gbps switching capacity, 26Gbps non-blocking throughput and approximately 39 million packets per second forwarding. They describe aggregate switching, not the speed of one port. VLANs, LACP, STP/RSTP, IGMP snooping and access controls give the managed Layer 2 network tools for segmentation and loop-aware deployment.
Rack and power
The steel enclosure occupies 1U in a standard 19-inch rack. Its internal 120W supply accepts 100–240V AC at 50/60Hz. Maximum consumption is 25W excluding PoE output and 120W including it; the endpoint PoE budget remains 95W. Follow the guide’s spacing instructions and do not stack equipment on the chassis.
Management and ownership
The current manufacturer requirement is UniFi Network 7.2.94 or later. A 1.3-inch touchscreen and port indicators provide local status alongside Ethernet management. This is the Standard USW-24-POE, not the Pro or Pro Max model. Confirm the supplied mains plug suits the installation and retain purchase and serial records for the supplied warranty.
| Manufacturer | Ubiquiti |
|---|---|
| Model | UniFi Standard 24 PoE |
| Regional SKU | USW-24-POE-EU |
| Layer | Layer 2 |
| Copper ports | 24 × 10/100/1000 RJ45 |
| Powered ports | 1–16: 802.3af/at PoE / PoE+ |
| Data-only ports | 17–24 |
| SFP ports | 25–26: 1Gbps Ethernet SFP |
| Total physical network ports | 26 |
| Shared PoE budget | 95W |
|---|---|
| Maximum per-port PSE output | 15.4W PoE; 32W PoE+, manufacturer rating |
| PoE voltage | 44–57V in 802.3af mode; 50–57V in 802.3at mode |
| PoE pairs | Pins 1,2 positive; 3,6 negative |
| AC input | 100–240V AC, 50/60Hz |
| Internal supply | 120W AC/DC |
| Maximum draw excluding / including PoE | 25W / 120W |
| Heat excluding PoE | 85.3BTU/hr |
| Switching capacity | 52Gbps |
|---|---|
| Non-blocking throughput | 26Gbps |
| Forwarding rate | 39Mpps, rounded current manufacturer rating |
| MAC table | 8,000 entries |
| VLANs | 1,000 |
| Packet buffer | 0.5MB |
| ACL capacity | 128 IPv4; 128 MAC |
| Layer 2 controls | LACP; STP/RSTP; IGMP snooping; 802.1X; ACLs; DHCP snooping/guarding; port isolation/mirroring; jumbo frames; LLDP-MED; voice VLAN |
| Management | Ethernet in-band; UniFi Network |
| Application requirement | UniFi Network 7.2.94 or later |
| Display | 1.3-inch touchscreen |
| Form factor | 1U, 19-inch rack |
|---|---|
| Dimensions (W × D × H) | 442.4 × 200 × 43.7mm, per exact guide |
| Weight | 3.00kg; 3.09kg with brackets |
| Material | SGCC steel |
| Colour | Silver |
| Supported rack depth | 400–1200mm |
| Operating temperature | −5–40°C |
| Operating humidity | 10–90%, noncondensing |
| ESD protection | ±16kV air; ±12kV contact |
| Certifications | CE, FCC, IC |
| Included | Switch, two rack brackets, bracket/mounting screws, cage nuts and power cord |
|---|---|
| Package | One unit, retail package |
| Supplier package dimensions | 521 × 123 × 313mm |
| Supplier packaged gross weight | 3.93kg |
| Supplied warranty | 12 months, subject to applicable supply terms; retain serial number and proof of purchase |
| Regional scope | EU SKU does not establish plug suitability or a blanket two-year South African warranty |
Only ports 1–16 provide PoE output. The 95W total is shared. Select compatible SFP modules separately and check rack clearance, mains plug and device budgets before installation.
Use official support resources for this product. Each link opens in a new tab.
Exact Standard 24 PoE package, port map, rack and power instructions. Historical Java and controller references in this guide are not a recommendation to install obsolete software; use the current model’s application requirements.
Open official support (opens in a new tab)Stable exact-model hardware, power and current UniFi Network requirements. Select USW-24-POE rather than Pro or Pro Max for support.
Open official support (opens in a new tab)Compare 2–5 products side by side
Help other shoppers by sharing an honest review.
Write a reviewYou are offline. Reconnect to check prices and shop.
Reviews
There are no reviews yet.