Official manufacturer overview
ASRock AMD B850 motherboard family overview
ASRock Global · Family overview of ASRock’s AMD B850 range, which includes this ATX B850 Riptide WiFi. The film covers several boards with different features and connectors.
Play to load this video from YouTube.
ASRock Phantom Gaming | AMD B850
Room for four NVMe drives on AM5
The ASRock B850 Riptide WiFi is a full-size ATX motherboard for supported Ryzen 7000, 8000 and 9000 processors. Four DDR5 slots sit alongside four NVMe sockets, two full-length expansion slots and wired and wireless networking. Choose your processor and expansion layout together to get the lanes your build needs.

Processor and firmware
Choose your Ryzen chip before setting up the board
Check the exact ASRock CPU support entry and minimum UEFI before installation. The rear BIOS Flashback button lets you prepare the board with the correct USB file and power supply even before the CPU and memory are installed. The 14+2+1 phase design and eight-layer PCB are part of the board’s power and signal design.
Memory layout
Start a two-module build in A2 and B2
Use a matched DDR5 pair in A2 and B2 for dual-channel operation. The board supports up to 256 GB across four unbuffered slots. ASRock lists DDR5-8000+ as an overclocking capability. Actual speed depends on the processor, DIMM kit, slot population and firmware. Check the qualified-memory list before choosing a high-capacity or four-DIMM kit.
Expansion and storage
Reserve the lower slot if you need an add-in card
Put your primary NVMe SSD in M2_1. Installing an SSD in M2_4 disables PCIE2, the lower full-length slot wired for PCIe 4.0 ×4. Ryzen 8000 models can also reduce the lanes or generation available to the graphics slot and some CPU-connected SSD sockets. The original build conveniences include an enlarged graphics-card release latch and a removable M.2 heatsink.
Connections for daily use
Wire the desk and choose the network that suits it
The rear panel gives you Killer 2.5 Gigabit Ethernet, two 10 Gb/s USB-C ports and HDMI for supported processor graphics. The case can add a 20 Gb/s front USB-C port if wired to the corresponding header. Wi-Fi 7 and Bluetooth 5.4 are built in. ASRock supports the Wi-Fi module on Windows 11, with 6 GHz availability dependent on the local rules and network.
Cooling and lighting
Plan connectors before closing the case
Use an ATX-compatible case and connect the 24-pin main board power and suitable 8-pin CPU leads. Separate CPU, chassis and pump headers give you control of the cooling layout. Keep 12 V RGB and 5 V addressable devices on their matching headers. ASRock lists Polychrome Sync and SignalRGB support for compatible devices.

Reviews
There are no reviews yet.