Huawei eKit AP263 · Wall-plate Wi-Fi 6
Wi-Fi 6, made for the wall.
The Huawei eKit AP263 brings dual-radio Wi-Fi 6, two Gigabit Ethernet ports, Bluetooth Low Energy and USB into a slim indoor wall-plate access point. Built-in smart antennas and 2×2 MIMO on each band support a considered installation for rooms where wireless access and a wired connection belong together.

Wireless architecture
Two bands, with two streams on each
AP263 operates on 2.4 GHz and 5 GHz, with a 2×2 MIMO arrangement on each radio and built-in smart antennas. MU-MIMO is part of its wireless feature set. The client device, radio environment and chosen channel settings determine which supported connection features can be used.
Radio and wired capacity
Plan the whole network path
Huawei lists a combined device rate of 2.975 Gbps across the radios. This is a wireless physical-link reference, rather than measured internet or application throughput for one client. The two RJ45 ports support 10, 100 and 1000 Mbit/s auto-sensing Ethernet; the wired network also shapes usable performance.
Room fit
A narrow body with several mounting options
The enclosure measures 160 mm high, 86 mm wide and 38 mm deep, with a listed device weight of 320 g. Huawei lists desk, wall, gypsum-board ceiling and junction-box installation, including 86 mm, 1-gang 120 mm and octagonal boxes. Match the mounting hardware and cable access to the chosen surface and box.
Power planning
Choose a suitable PoE or DC source
AP263 accepts IEEE 802.3at/af Power over Ethernet or 12 V DC with a ±10% voltage tolerance. Match the supply and power budget to the installation, including any USB accessory requirements. Check the included power equipment and mounting hardware before installation.
Local connections
Ethernet, BLE and USB in one enclosure
Two Gigabit RJ45 interfaces sit alongside Bluetooth Low Energy and USB support. Confirm the required USB function, supported accessory and software configuration before deployment; these connections do not establish universal accessory or controller compatibility.
Deployment and client planning
Set the limits around the room and its users
Huawei recommends 64 access users and lists a maximum of 256. Treat these as planning references, with application load and client capabilities considered alongside radio conditions. Use the permitted country settings, channels and transmit power for the supplied unit, and confirm its software revision, management mode and service requirements before installation.

Reviews
There are no reviews yet.