Solidigm D7-PS1010/PS1030 product brief
Official family brief. Distinguish PS1010 standard endurance from PS1030 and the exact capacity/form factor when comparing data.
Open official support (opens in a new tab)
Solidigm D7-PS1010 Series (7.68TB, 2.5in U.2 15mm PCIe 5.0 x4, Hynix V7, TL
New
Supplier has stock — 4 avail
Solidigm D7-PS1010 7.68 TB U.2 15 mm PCIe 5.0 x4 NVMe SSD, 176-layer TLC, standard endurance and Generic No Opal T001 single-pack variant.
R112,369.00
VAT included · Secure checkout
Supplier has stock — 4 avail
Key product details
Full specifications below- Upc: 840307304285
- Gtin: 840307304285
- Brand: SolidIGM
- Condition: New
Delivery & support
Clear fulfilment, warranty and payment details.
- Availability Supplier has stock — 4 avail Supplier has stock — 4 avail
- Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
- Dispatch Ships within 24 hours. Ships within 24 hours
- Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
- Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
- Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Solidigm D7-PS1010 • 7.68 TB • U.2
Standard-endurance PCIe 5.0 storage for enterprise workloads.
The D7-PS1010 SB5PH27X076T001 is a 7.68 TB, 15 mm U.2 enterprise SSD using 176-layer TLC NAND and a PCIe 5.0 x4 NVMe interface. This generic single-pack ordering code is the No Opal variant. It is designed for supported data-centre storage systems, with standard-endurance positioning and a specified five-year write-workload basis.
7.68 TBSingle U.2 drive
PCIe 5.0 x4NVMe • 15 mm
176-layer TLCStandard endurance
No OpalExact T001 variant
Enterprise workload
A defined place in the D7 range.
D7-PS1010 targets mainstream enterprise and cloud storage, including AI/ML data pipelines, HPC, databases and general-purpose servers. It is the standard-endurance member of this family; PS1030 is a separate mid-endurance product. This 7.68 TB U.2 model should be selected on its own capacity, workload and host requirements rather than the highest figures from another D7 drive.
Interface and installation
U.2 is a host requirement, not just a drive shape.
The drive uses a 2.5-inch, 15 mm U.2 format with PCIe 5.0 x4 and NVMe. A suitable NVMe backplane, supported carrier, PCIe connectivity, firmware and cooling are required. A bay accepting 2.5-inch SATA or SAS disks does not by itself establish NVMe compatibility. The PS1010 family also contains E3.S and E1.S designs; their mounting and liquid-cooling arrangements are separate from this U.2 model.
Performance planning
Compare the workload as well as the headline rate.
The supplied configuration is listed with up to 14,500 MB/s sequential reads, 10,000 MB/s sequential writes, 3,000,000 random read IOPS and 400,000 random write IOPS. Solidigm’s family brief reports performance under defined block sizes and queue depths; family maxima are not guarantees for every capacity, firmware or application. Confirm capacity-specific figures for the intended deployment before sizing a service around these limits.
Write endurance
One drive write per day on a five-year basis.
Solidigm places PS1010 in its standard-endurance category at 1 DWPD over five years. The separately quoted three-year rate of 1.66 DWPD uses a different time basis and does not add to that allowance. Match actual host writes to the endurance specification and monitor drive wear; usable formatted capacity is lower than the nominal 7.68 TB.
Protection and security
Keep the ordering-code distinction clear.
The exact T001 ordering code is Generic No Opal; it should not be substituted for the separate TOP1 Opal version when a storage-security policy requires that feature. Solidigm documents enhanced power-loss-imminent testing and data-protection validation for the family, but these do not replace backups or a validated recovery design. The listed 2.5-million-hour MTBF is a statistical reliability figure, not an individual-drive lifespan.
Power and physical planning
Budget airflow and electrical headroom together.
The family brief lists maximum average active read/write power of 23 W and idle power of 5 W. Do not treat idle power as the active workload budget. The supplied U.2 configuration is listed for 0–77°C operation and approximately 140 g mass. Confirm the server’s airflow, drive-bay clearance, power delivery and thermal requirements for this exact drive and firmware.
Support and service
Use the full part number for a deployment.
Solidigm lists D7-PS1010 under its limited five-year data-centre SSD warranty policy, subject to the applicable terms and endurance conditions. Keep the drive serial and purchase records, and check whether the system vendor supplies its own firmware or support package. Review firmware applicability through the manufacturer and host vendor; a public product page does not establish that any particular firmware is the newest or suitable for every server.
Specifications
Identity and configuration
| Ordering code | SB5PH27X076T001 |
|---|---|
| Product | Solidigm D7-PS1010 |
| Capacity | 7.68 TB nominal; formatted usable capacity is lower |
| Package | Generic No Opal single pack, one drive |
| Form factor | 2.5-inch U.2, 15 mm |
| Interface | PCIe 5.0 x4, NVMe |
| Media | 176-layer 3D TLC NAND, V7 |
| Colour | Black |
| Security variant | No Opal; do not substitute separate TOP1 Opal capability |
Listed configuration performance
| Sequential read / write | Up to 14,500 / 10,000 MB/s |
|---|---|
| Random read / write | Up to 3,000,000 / 400,000 IOPS |
| Rating qualification | Supplied configuration ratings; capacity/firmware-specific manufacturer validation required before workload sizing |
| Family test context | 128 KB sequential at QD128; 4 KB random at QD512; actual use and host configuration affect results |
| Endurance | Standard endurance; 1 DWPD over five years |
| Three-year comparison basis | 1.66 DWPD over three years, not an additional allowance |
Reliability and protection
| MTBF | 2.5 million hours, statistical measure |
|---|---|
| UBER | Manufacturer family tested to 1 × 10⁻¹⁸ |
| Power-loss validation | Enhanced power-loss-imminent testing documented for family |
| Operating shock | Listed 1000 G at 0.5 ms |
| Storage shock | Listed 1000 G at 0.5 ms |
| Operating vibration | Listed 2.17 G at 5–700 Hz |
| Storage vibration | Listed 3.13 G at 5–800 Hz |
Power, environment and installation
| Maximum average active power | 23 W, manufacturer family brief |
|---|---|
| Idle power | 5 W |
| Listed operating temperature | 0–77°C |
| Listed drive mass | 0.14 kg |
| Host requirements | Supported U.2 NVMe bay/backplane/carrier, PCIe lanes, firmware and cooling; not universal SATA/SAS bay fit |
| Liquid cooling | No liquid-cooling feature claimed for this U.2 ordering code |
Warranty and support
| Warranty | Limited five-year data-centre SSD warranty under Solidigm policy; terms/endurance conditions apply |
|---|---|
| Support planning | Check exact part, firmware and host-vendor qualification; do not assume universal OS or server certification |
Confirm exact capacity-specific performance, thermal conditions, firmware and host qualification before sizing a deployment.
Driver & Software Downloads
Use official support resources for this product. Each link opens in a new tab.
Solidigm D7-PS1010 product and support resources
Stable manufacturer family page. Select exact capacity, U.2 format and ordering code before choosing documentation or updates.
Open official support (opens in a new tab)No reviews yetBe the first to review this product.
Reviews
There are no reviews yet.