Kingston KF440C19RB2/8 specification sheet
Exact manufacturer part sheet with JEDEC and overclocking profiles, electrical conditions and dimension drawings.
Open official support (opens in a new tab)
Kingston 8GB 4000MT/s DDR4 CL19 DIMM FURY Renegade Black
New
Supplier has stock — 10 avail
Kingston FURY Renegade DDR4 8 GB single desktop DIMM with 4000 MT/s 19-23-23 profile at 1.35 V, Intel XMP 2.0 and a 41.98 mm heat spreader.
R3,049.00
VAT included · Secure checkout
Supplier has stock — 10 avail
Key product details
Full specifications below- Upc: 740617337761
- Gtin: 740617337761
- Brand: Kingston
- Condition: New
Delivery & support
Clear fulfilment, warranty and payment details.
- Availability Supplier has stock — 10 avail Supplier has stock — 10 avail
- Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
- Dispatch Ships within 24 hours. Ships within 24 hours
- Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
- Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
- Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Kingston FURY Renegade DDR4 • 8 GB • Single module
A defined DDR4 profile in a two-tone heat spreader.
Kingston FURY Renegade DDR4 KF440C19RB2/8 is a single 8 GB desktop memory module with a 4000 MT/s rated profile, 19-23-23 timings and a fitted heat spreader. Its specification separates that profile from its default JEDEC settings, giving you the detail needed to check a compatible system and plan an upgrade.
8 GB1 × desktop DIMM
4000 MT/sCL19 rated profile
Intel XMP 2.01.35 V profile
41.98 mmHeight with heat spreader
Single-module capacity
8 GB in a single DDR4 DIMM.
This 8 GB FURY Renegade DDR4 module is supplied individually, rather than as a matched multi-module kit. Its 288-pin desktop DIMM format and DDR4 generation must match the motherboard. One module does not by itself establish the system’s channel arrangement, supported total capacity or final memory speed.
Profiles and timings
Separate the default from the faster profile.
Kingston tests this part at 4000 MT/s with 19-23-23 timings at 1.35 V. Its default SPD is DDR4-2400 CL17-17-17 at 1.2 V. Intel XMP 2.0 provides 4000 MT/s CL19-23-23 and a second 3600 MT/s CL17-21-21 profile, both at 1.35 V. Choose a supported profile in the motherboard firmware; rated settings depend on the processor, board, firmware and installed module population.
Organisation and fit
Plan around the actual module design.
The module uses a single-rank 1Rx8 organisation with eight 1G × 8-bit DRAM devices. It is non-ECC and unbuffered, with on-die termination, an SPD EEPROM and gold contact fingers. Check the exact part against the motherboard or system memory support list, including the number of DIMMs permitted at the intended profile.
Heat spreader and clearance
Make room for the finished module.
The two-tone Renegade heat spreader gives an overall height of 41.98 mm and thickness of 8.29 mm. Both the complete module length of 133.35 mm and its height matter when planning around an air cooler or crowded socket area. Use the motherboard’s recommended DIMM positions and verify cooler clearance before installation.
Operating conditions and support
A defined specification, with qualified lifetime cover.
Kingston specifies a 0–85°C operating range and −55–100°C storage range. The product-lifetime warranty covers Kingston FURY memory under the manufacturer’s terms; product lifetime refers to normal industry use expectancy, with definitions varying by country. Keep proof of purchase and module identification. Avoid unsupported voltage or timing changes, and use the exact part sheet when checking profile settings.
Specifications
Module identity
| Part number | KF440C19RB2/8 |
|---|---|
| Series | FURY Renegade DDR4 |
| Module capacity / quantity | 8 GB / 1 module |
| Memory generation | DDR4 |
| Form factor | 288-pin desktop unbuffered DIMM |
| Error checking | Non-ECC |
| Rank and organisation | 1Rx8; 1G × 64-bit module, eight 1G × 8-bit FBGA devices |
| Colour / cooling | Black/grey two-tone heat spreader |
| Module contact finish | Gold contact fingers |
Factory profiles
| Default JEDEC SPD | DDR4-2400, CL17-17-17, 1.2 V |
|---|---|
| Intel XMP version | 2.0 |
| XMP profile 1 | DDR4-4000, CL19-23-23, 1.35 V |
| XMP profile 2 | DDR4-3600, CL17-21-21, 1.35 V |
| On-die termination | Supported |
| Internal banks | 16, in four groups of four |
| Data strobe | Bi-directional differential |
| Prefetch / burst | 8-bit prefetch; BL8 or BC4 burst chop |
Electrical and default timing data
| Typical default VDD / VDDQ | 1.2 / 1.2 V |
|---|---|
| Typical VPP | 2.5 V |
| VDDSPD range | 2.2–3.6 V |
| Default CL(IDD) | 17 cycles |
| Default tRC minimum | 45.75 ns |
| Default tRFC minimum | 350 ns |
| Default tRAS minimum | 32 ns |
| Profile qualification | Published faster rates require compatible CPU, board, BIOS, module population and enabled profile; not universal plug-and-play rates |
Physical, environment and support
| Dimensions, length × height × thickness | 133.35 × 41.98 × 8.29 mm |
|---|---|
| Height includes | Heat spreader |
| Operating temperature | 0–85°C |
| Storage temperature | −55–100°C |
| UL flammability rating | 94 V-0 |
| Installation | Match exact DDR generation and host QVL; follow motherboard slot population and cooler-clearance guidance |
| Warranty | Limited product-lifetime warranty under Kingston terms; country definitions and exclusions apply |
| Packaging | Single module; supplier lists retail packaging |
Check exact CPU, motherboard, firmware and module-population support before selecting a memory profile.
Driver & Software Downloads
Use official support resources for this product. Each link opens in a new tab.
No reviews yetBe the first to review this product.
Reviews
There are no reviews yet.