Kingston KF568C34BBE-16 specification sheet
Exact manufacturer part sheet with JEDEC and overclocking profiles, electrical conditions and dimension drawings.
Open official support (opens in a new tab)
Kingston 16GB 6800MT/s DDR5 CL34 DIMM FURY Beast Black EXPO
New
Supplier has stock — 10 avail
Kingston FURY Beast DDR5 16 GB single desktop DIMM with 6800 MT/s 34-45-45 profile at 1.4 V, AMD EXPO 1.1 and Intel XMP 3.0.
R7,669.00
VAT included · Secure checkout
Supplier has stock — 10 avail
Key product details
Full specifications below- Upc: 740617342628
- Gtin: 740617342628
- Brand: Kingston
- Condition: New
Delivery & support
Clear fulfilment, warranty and payment details.
- Availability Supplier has stock — 10 avail Supplier has stock — 10 avail
- Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
- Dispatch Ships within 24 hours. Ships within 24 hours
- Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
- Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
- Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Kingston FURY Beast DDR5 • 16 GB • Single module
Two profile standards, one clearly specified DDR5 module.
Kingston FURY Beast DDR5 KF568C34BBE-16 is a single 16 GB desktop memory module with a 6800 MT/s rated profile, 34-45-45 timings and a fitted heat spreader. Its specification separates that profile from its default JEDEC settings, giving you the detail needed to check a compatible system and plan an upgrade.
16 GB1 × desktop DIMM
6800 MT/sCL34 rated profile
EXPO + XMP1.4 V profile
34.9 mmHeight with heat spreader
Single-module capacity
A 16 GB building block for a compatible desktop.
This 16 GB FURY Beast DDR5 module is supplied individually, rather than as a matched multi-module kit. Its 288-pin desktop DIMM format and DDR5 generation must match the motherboard. One module does not by itself establish the system’s channel arrangement, supported total capacity or final memory speed.
Profiles and timings
Separate the default from the faster profile.
Kingston tests this part at 6800 MT/s with 34-45-45 timings at 1.4 V. Its default SPD is DDR5-4800 CL40-39-39 at 1.1 V. AMD EXPO 1.1 and Intel XMP 3.0 provide both 6800 MT/s CL34-45-45 and 6400 MT/s CL32-39-39 profiles at 1.4 V. Choose a supported profile in the motherboard firmware; rated settings depend on the processor, board, firmware and installed module population.
Organisation and fit
Plan around the actual module design.
The module uses a single-rank 1Rx8 organisation with eight 2G × 8-bit DRAM devices. It is a non-ECC unbuffered module: DDR5 on-die ECC operates inside the memory chips and does not provide a system-level ECC memory path. Check the exact part against the motherboard or system memory support list, including the number of DIMMs permitted at the intended profile.
Heat spreader and clearance
Make room for the finished module.
The black Beast heat spreader gives an overall height of 34.9 mm and thickness of 6.62 mm. Both the complete module length of 133.35 mm and its height matter when planning around an air cooler or crowded socket area. Use the motherboard’s recommended DIMM positions and verify cooler clearance before installation.
Operating conditions and support
A defined specification, with qualified lifetime cover.
Kingston specifies a 0–85°C operating range and −55–100°C storage range. The product-lifetime warranty covers Kingston FURY memory under the manufacturer’s terms; product lifetime refers to normal industry use expectancy, with definitions varying by country. Keep proof of purchase and module identification. Avoid unsupported voltage or timing changes, and use the exact part sheet when checking profile settings.
Specifications
Module identity
| Part number | KF568C34BBE-16 |
|---|---|
| Series | FURY Beast DDR5 |
| Module capacity / quantity | 16 GB / 1 module |
| Memory generation | DDR5 |
| Form factor | 288-pin desktop unbuffered DIMM |
| Error checking | Non-ECC module; DDR5 on-die ECC is internal to DRAM and is not system ECC |
| Rank and organisation | 1Rx8; 2G × 64-bit module, eight 2G × 8-bit FBGA devices |
| Colour / cooling | Black heat spreader |
| Module contact finish | Gold contact fingers |
Factory profiles
| Default JEDEC SPD | DDR5-4800, CL40-39-39, 1.1 V |
|---|---|
| AMD EXPO version | 1.1 |
| EXPO profile 0 | DDR5-6800, CL34-45-45, 1.4 V |
| EXPO profile 1 | DDR5-6400, CL32-39-39, 1.4 V |
| Intel XMP version | 3.0 |
| XMP profile 1 | DDR5-6800, CL34-45-45, 1.4 V |
| XMP profile 2 | DDR5-6400, CL32-39-39, 1.4 V |
Electrical and default timing data
| Typical default VDD / VDDQ | 1.1 / 1.1 V |
|---|---|
| Typical VPP | 1.8 V |
| VDDSPD range | 1.8–2.0 V |
| Default CL(IDD) | 40 cycles |
| Default tRC minimum | 48 ns |
| Default tRFC minimum | 295 ns |
| Default tRAS minimum | 32 ns |
| Profile qualification | Published faster rates require compatible CPU, board, BIOS, module population and enabled profile; not universal plug-and-play rates |
Physical, environment and support
| Dimensions, length × height × thickness | 133.35 × 34.9 × 6.62 mm |
|---|---|
| Height includes | Heat spreader |
| Operating temperature | 0–85°C |
| Storage temperature | −55–100°C |
| UL flammability rating | 94 V-0 |
| Installation | Match exact DDR generation and host QVL; follow motherboard slot population and cooler-clearance guidance |
| Warranty | Limited product-lifetime warranty under Kingston terms; country definitions and exclusions apply |
| Packaging | Single module; supplier lists retail packaging |
Check exact CPU, motherboard, firmware and module-population support before selecting a memory profile.
Driver & Software Downloads
Use official support resources for this product. Each link opens in a new tab.
No reviews yetBe the first to review this product.
Reviews
There are no reviews yet.