Anycubic PLA Silk Dual Filament 1kg – Red/Blue

Product details

Silk-gloss dual-colour PLA filament | Gradient colour shifting in a single pass | Adjustable luster via temperature and speed | 1 kg per roll | Compatible with all 1.75 mm FDM printers

The Anycubic PLA Silk Dual Filament in Red/Blue is designed for makers who want visually striking, multi-toned prints without the complexity of a multi-extruder setup. The dual-colour construction produces a rich gradient effect that shifts across the model’s surface as each layer is laid down, delivering a premium silk-like luster that catches the eye from any angle. You can fine-tune the finish by adjusting nozzle temperature and print speed — a higher temperature or slower speed produces a smoother, higher-gloss surface, giving you direct control over the final look. Compatible with any FDM printer that accepts 1.75 mm filament, it prints at a nozzle temperature of 210–240 °C with a heated bed at 55–56 °C and supports speeds from 50 to 250 mm/s. Each roll weighs 1 kg and is rated for decorative parts, fan art, and artistic models where appearance is the priority.

Features

• Dual-colour construction produces a seamless gradient effect across printed surfaces in a single pass


• Silk-like luster that shifts and deepens when the model is rotated, adding visual depth and a premium feel


• Adjustable finish — increase nozzle temperature or reduce print speed for a higher-gloss, smoother surface


• Compatible with all 1.75 mm FDM printers; no multi-extruder setup required


• Supports Anycubic ACE Pro intelligent identification for automatic filament recognition (internet connection required)


• Reusable spool with threaded locking system reduces entanglement and filament scatter


• Certified to RoHS, REACH, and SDS standards

Specifications

• Colour: Red Blue (#E63888,#003594)


• Dry Out Before Use: Recommended


• Drying Condition: 55-65?, 6-8h


• ACE Compatibility: Compatible


• Nozzle Size: Recommended 0.4 mm or above


• Printing Temperature: 210-240 ?


• Heated Bed Temperature: 55-56 ?


• Recommended Printing Speed: 50-250 mm/s


• Maximum Volume Speed (Flow Rate): 8 mm³/s


• Density: 1.22 g/cm³


• Melt Index: 9±1 g/10 min (190?/2.16kg)


• Melting Point Temperature: 164 ?


• Vicat Softening Temperature: 54 ?


• Heat Deflection Temperature (0.45MPa): 53 ?


• Young’s Modulus: 2000±200 MPa


• Tensile Strength: 37±4 MPa


• Elongation at Break: 28±5%


• Bending Modulus: 2400±160 MPa


• Bending Strength: 66±4 MPa


• lzod lmpact Strength (X-Y): 20±2 kJ/m²


• Tensile Strength (Z): 12±4 MPa


• Filament Type: Aesthetic filaments


• Recommend to Print: Decorative parts, fandom, artworks


• Intelligent Identification: Supported


• Reusable Filament Spool: Supported


• Size: 1KG

What’s in the Box

• Anycubic PLA Silk Dual Filament 1kg – Red/Blue x1

Warranty

None