Top of pagePrimary navigation
Flash sale Limited-time prices and current MatzoTech offers Shop offers

Antec FLUX Rear ARGB ATX Mid Tower Gaming Chassis – Black

0.0 No reviews yet Write a review
SKU: FLUX REAR
New Supplier has stock — 10 avail

Antec FLUX REAR black ATX case with five supplied fans, front PSU chamber, wood trim and a tempered-glass side. Roof radiator support up to 360 mm.

R1,909.00

VAT included · Secure checkout

Supplier has stock — 10 avail

Key product details

Full specifications below
  • Upc: 761345102414
  • Gtin: 761345102414
  • Brand: Antec
Add to wishlist

Delivery & support

Clear fulfilment, warranty and payment details.

  • Availability Supplier has stock — 10 avail Supplier has stock — 10 avail
  • Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
  • Dispatch Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation. Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation.
  • Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
  • Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
  • Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Ask us a question

Official manufacturer overview

Antec FLUX REAR first look

Antec · Antec presents the black FLUX REAR chassis. For the supplied fan configuration, use the specifications tab: Antec lists three ARGB PWM fans and two reverse PWM shroud fans. Components shown are illustrative.

Play to load this video from YouTube.

ANTEC FLUX REAR · BLACK

A front power chamber leaves the rear clear

Antec’s black FLUX REAR pairs a wood-trimmed mesh front with a 4 mm glass side. The front-mounted power supply changes the internal layout, leaving room for shroud fans under the graphics card and a radiator in the roof.

Black Antec FLUX REAR case with wood trim, glass side and lit fans
5 fansInstalled at the front, shroud and rear
400 mmMaximum GPU length
360 mmMaximum roof radiator length

LAYOUT

Put the power supply up front

The dedicated chamber moves the power supply to the front of the case. Antec provides an internal power extension so you can connect it within the chassis. Grommets and straps help route the remaining leads. Behind the glass, the supplied support bracket gives a long graphics card another point of support.

COOLING

Bring air in under the graphics card

Two 140 mm front ARGB PWM fans feed the case through its recessed mesh panel. Two reverse 120 mm PWM shroud fans direct intake upward beneath the graphics card, while the rear 140 mm ARGB PWM fan serves as exhaust.

BUILD FIT

Plan the roof and rear fan together

The roof takes radiators up to 360 mm. Check radiator thickness against the rear fan before fitting your cooler. The case also supports standard ATX, Micro-ATX and Mini-ITX boards, including compatible rear-connector designs.

ACCESS

Open the case without tools

Tool-free panels give you access to the build and the underside dust filter helps simplify cleaning. Connect peripherals through two USB-A ports, a 10 Gb/s USB-C port or the headset combo jack.

Specifications

Identity and chassis

Manufacturer modelAntec FLUX REAR
UPC761345102414
ChassisBlack mid-tower with steel, plastic and wood construction
Side panel4 mm tempered glass
Dimensions (D × W × H)460 × 240 × 460 mm
Net / gross weight8.18 kg / 9.72 kg
Board supportATX, Micro-ATX, Mini-ITX and compatible rear-connector designs
Slots and drive bays7 expansion slots, 1 × 3.5-inch and 2 × 2.5-inch bays

Assembly and I/O

GPU lengthUp to 400 mm
CPU cooler heightUp to 180 mm
PSU lengthUp to 170 mm, excluding cables
Access and supportTool-free panels, bottom dust filter and GPU support bracket
I/O and controls2 × USB-A 5 Gb/s, USB-C 10 Gb/s, headset combo jack, power and reset

Cooling

Supplied fansFront 2 × 140 mm ARGB PWM, shroud 2 × 120 mm reverse PWM, rear 1 × 140 mm ARGB PWM
Fan positionsFront 2 × 140 mm, roof 3 × 120 mm or 2 × 140 mm, shroud 2 × 120 mm, rear 1 × 120/140 mm
RadiatorsRoof 120/140/240/280/360 mm, rear 120 mm
Roof fit with rear fanAntec specifies rear 140 mm fan with a roof radiator up to 55 mm thick, and rear 120 mm fan for 55–70 mm.
WarrantyAntec two-year warranty, subject to its terms.

Driver & Software Downloads

Use official support resources for this product. Each link opens in a new tab.

No reviews yetBe the first to review this product.

Reviews

There are no reviews yet.

Be the first to review “Antec FLUX Rear ARGB ATX Mid Tower Gaming Chassis – Black”

Your email address will not be published. Required fields are marked *

WhatsApp