Checking which support options are available…
Who would you like help from?
Enter your name to begin your live chat with an online consultant.
What can we help you with?
Your details are used only to respond. MatzoBot requests are securely passed to the MatzoTech team.
Your request has been emailed to MatzoTech. A consultant will reply using the email address or mobile number you supplied.
Anycubic Photon P1 MSLA resin printer with a 10.1-inch 14K exposure LCD, 223 × 126 × 230mm single-plate build area, smart heated vat and USB, 2.4GHz WLAN and LAN workflows.
R16,149.00
Supplier has stock — 3 avail
Clear fulfilment, warranty and payment details.
Anycubic • Photon P1 • Resin 3D printing
The Photon P1 pairs a 10.1-inch 14K exposure LCD, a 223 × 126 × 230mm single-plate build area and a ball-screw Z axis. Automatic levelling assistance, network printing and a temperature-controlled vat support the preparation of detailed models and prototypes. Resin choice, exposure settings and careful post-processing remain part of every successful job.
Detail in the model
The 10.1-inch LCD is the exposure panel beneath the resin vat, rather than the operator touchscreen. Its 13,312 × 5,120 matrix and 16.8 × 24.8µm XY pixel size give a useful basis for planning fine geometry. Pixel size and the manufacturer’s 0.02mm Z-axis specification are different measurements; neither promises that every finished part will match those dimensions.
A stable vertical path
A ball screw and linear guides support the Photon P1’s vertical motion. Use the 0.02–0.15mm layer range to balance surface stepping against print time, and follow the resin profile rather than treating one setting as universal. The single-plate build space is 223 × 126 × 230mm; the optional dual-material arrangement has a smaller working area and is not assumed included.
Resin preparation
The smart vat can be set to preheat between 25°C and 40°C before printing. During a print its temperature-control logic differs from the preheat setting. A pressure-sensor check estimates resin sufficiency before the job; it does not continuously measure resin level throughout printing. The vat holds up to 1L at its marked maximum. Do not touch a hot vat directly.
Setup and observation
The levelling-free design normally avoids frequent manual adjustment, but recalibration can be necessary after component replacement, a levelling error or a physical impact. The integrated monitoring camera supports remote viewing and time-lapse capture; enable time-lapse before starting. Monitoring can miss partial failures, so it does not replace inspection of the model, film and build plate.
Connected preparation
Prepare models with Anycubic Photon Workshop and transfer a job with a USB drive or the supported WLAN/LAN workflow. The wireless interface uses the 2.4GHz band. Anycubic lists Windows 10, Windows 11 and Mac support; check the current slicer requirements for the chosen computer. Network access and cloud account requirements depend on the printing method selected.
A complete work area
The 366 × 338 × 539mm machine weighs 13.6kg. Allow working room for access, resin handling, cleaning and curing, and follow the resin safety data and product instructions. Position it on a stable, ventilated surface away from direct sunlight. Resin, washing/curing equipment and the dual-material kit must not be assumed to come with this printer-only listing.
| Model | Anycubic Photon P1; listing SKU PP10BK0A-O |
|---|---|
| Technology | LCD / MSLA resin printing; COB light source |
| Exposure panel | 10.1-inch 14K LCD; not the operator control screen |
| XY matrix / pixel size | 13,312 × 5,120 / 16.8 × 24.8µm |
| Single build plate area | 223 × 126 × 230mm |
| Layer thickness | 0.02–0.15mm |
| Z-axis accuracy | 0.02mm manufacturer specification; finished-part accuracy varies |
| Motion construction | Ball screw with linear guide rails |
| Levelling | Normally no frequent manual adjustment; recalibrate when required by guide |
| Resin | Anycubic recommends 405nm resin; select matching resin profile |
| Release film | NFEP |
| Resin vat capacity | 1L to MAX line |
| Preheat setting | 25–40°C before printing; during-print control uses separate logic |
| Resin level check | Pre-print estimate; not continuous in-print detection |
| Optional dual-material kit | Separate; smaller 125.98 × 66 × 195mm dual-plate print size |
| Transfer methods | USB drive, WLAN and LAN |
|---|---|
| Wi-Fi | 2.4GHz; 2.400–2.4835GHz; AP, STA and mixed AP+STA |
| Slicer | Anycubic Photon Workshop; verify current computer requirements |
| Computer systems | Windows 10 / Windows 11 / Mac listed by manufacturer |
| Monitoring camera | 480P; remote viewing and time-lapse support |
| Time-lapse | Enable before printing; remove camera protective cover |
| Power-loss recovery | Supported by manufacturer FAQ |
| Dimensions (L × W × H) | 366 × 338 × 539mm |
|---|---|
| Net weight | 13.6kg |
| Rated input | 100–120V~ / 200–240V~; follow unit label and setup instructions |
| Rated power | 215W |
| Recommended environment | 8–40°C; 20–50% RH; stable ventilated surface, avoid UV/direct sun |
| Supplier-listed warranty | 12 months; coverage and consumable exclusions require confirmation |
| Supplier-listed package | Printer, build platform, resin tray, funnel/filter, two scrapers, Allen keys, wipes/protective accessories, USB drive, power cord and manual; final local contents unverified |
| Additional process equipment | Resin and washing/curing equipment not assumed included |
Use the supplied manual and the selected resin’s safety data for handling, cleaning, curing and disposal. Optional dual-material hardware and external washing/curing equipment are separate unless the local order explicitly includes them. Supplier package and warranty details require confirmation.
Use official support resources for this product. Each link opens in a new tab.
Exact-model manufacturer reference with software/system support, network guides, calibration and resin handling. Check current slicer requirements; no latest-version claim.
Open official support (opens in a new tab)Compare 2–5 products side by side
Help other shoppers by sharing an honest review.
Write a reviewYou are offline. Reconnect to check prices and shop.
Reviews
There are no reviews yet.