Anycubic PLA Silk Dual Filament 1kg – Pink/Gold

Product details

Silk-lustre dual-colour PLA filament | Gradient pink and gold finish | Adjustable gloss via print settings | Compatible with 0.4 mm nozzles and above | Suitable for decorative prints and artistic models

The Anycubic PLA Silk Dual Filament in Pink/Gold is designed for makers who want their prints to stand out with a rich, multi-tonal finish. The dual-colour silk formulation blends pink and gold tones into a gradient effect that shifts as the model is rotated, lending finished pieces a premium, layered appearance suited to decorative parts, fan art, and artistic projects. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity, producing a smoother, higher-gloss result. The filament prints at 210–240 °C with a heated bed set to 55–56 °C and accommodates speeds of 50–250 mm/s, giving you the flexibility to balance quality and throughput. Use a 0.4 mm nozzle or larger for best results, and dry the filament at 55–65 °C for 6–8 hours before use to ensure consistent extrusion.

Features

• Dual-colour Pink/Gold silk finish creates a gradient, multi-tonal effect that shifts with viewing angle


• Adjustable luster — increase nozzle temperature or reduce print speed for a higher-gloss, silky surface


• Printing temperature range of 210–240 °C suits a wide variety of FDM printers with a 0.4 mm or larger nozzle


• Recommended print speed of 50–250 mm/s for flexible throughput without sacrificing surface quality


• Heated bed temperature of 55–56 °C for reliable first-layer adhesion


• Dry before use at 55–65 °C for 6–8 hours to maintain filament integrity and consistent flow


• Complies with RoHS, REACH, and SDS certifications

Specifications

• Colour: Pink Gold (#F67599,#F2A900)


• Dry Out Before Use: Recommended


• Drying Condition: 55-65?, 6-8h


• ACE Compatibility: Compatible


• Nozzle Size: Recommended 0.4 mm or above


• Printing Temperature: 210-240 ?


• Heated Bed Temperature: 55-56 ?


• Recommended Printing Speed: 50-250 mm/s


• Maximum Volume Speed (Flow Rate): 8 mm³/s


• Density: 1.22 g/cm³


• Melt Index: 9±1 g/10 min (190?/2.16kg)


• Melting Point Temperature: 164 ?


• Vicat Softening Temperature: 54 ?


• Heat Deflection Temperature (0.45MPa): 53 ?


• Young’s Modulus: 2000±200 MPa


• Tensile Strength: 37±4 MPa


• Elongation at Break: 28±5%


• Bending Modulus: 2400±160 MPa


• Bending Strength: 66±4 MPa


• lzod lmpact Strength (X-Y): 20±2 kJ/m²


• Tensile Strength (Z): 12±4 MPa


• Filament Type: Aesthetic filaments


• Recommend to Print: Decorative parts, fandom, artworks


• Intelligent Identification: Supported


• Reusable Filament Spool: Supported


• Size: 1KG

What’s in the Box

• Anycubic PLA Silk Dual Filament 1kg – Pink/Gold x1

Warranty

None