Top of pagePrimary navigation
Flash sale Limited-time prices and current MatzoTech offers Shop offers

Cudy 4 Port Gigabit PoE 1x PoE Input 60W Switch

0.0 No reviews yet Write a review
SKU: POE40
New Supplier has stock — 10 avail

Cudy POE40 2.0 Gigabit PoE extender with one 802.3bt/at/af input, four PoE outputs and a 250 m Extend mode at 10 Mbps.

R699.00

VAT included · Secure checkout

Supplier has stock — 10 avail

Key product details

Full specifications below
  • Ean: 6971690791513
  • Gtin: 6971690791513
  • Brand: Cudy
Add to wishlist

Delivery & support

Clear fulfilment, warranty and payment details.

  • Availability Supplier has stock — 10 avail Supplier has stock — 10 avail
  • Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
  • Dispatch Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation. Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation.
  • Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
  • Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
  • Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Ask us a question

CUDY • POE40 2.0 • GIGABIT POE EXTENDER

Run four PoE devices from one uplink

The Cudy POE40 2.0 splits one powered Ethernet feed into four wired connections for compatible cameras, access points or other PoE devices. Choose faster links for shorter runs or switch to Extend mode for a longer run at 10 Mbps.

Front of the Cudy POE40 extender showing four output ports, its input and mode switches
1 in / 4 outGigabit RJ45 ports
Up to 100 mDownlink at Gigabit speed
Up to 250 mExtend mode at 10 Mbps
≥60 W sourceCudy input recommendation

Power budget

Size the source for all four devices

Port 5 takes the powered uplink and ports 1–4 serve the end devices. With sufficient input, Cudy rates the extender for up to two 30 W outputs or four 12.95 W outputs. Available power falls with cable loss and the extender’s own consumption.

Cable runs

Choose between speed and distance

With Cat 5e or better cable, the downlink can reach up to 100 m at Gigabit speeds. Extend mode reaches up to 250 m at 10 Mbps. The upstream distance depends on the source, and chained units share the available power budget.

Controls

Isolate ports and recover an unresponsive device

Use VLAN mode to isolate downlink ports from each other. The separate PoE Watchdog can power-cycle an unresponsive connected device. Fit the metal enclosure to a wall or place it on a desk.

Specifications

Identification

ModelCudy POE40 2.0
Part numberPOE40
EAN6971690791513
TypeFour-output Gigabit PoE extender
ColourGrey

Ethernet and PoE

Uplink1 × Gigabit RJ45 (port 5), IEEE 802.3bt/at/af input
Downlinks4 × Gigabit RJ45 (ports 1–4), IEEE 802.3at/af outputs
Input assignmentMode A, Mode B or four-pair
Output assignmentMode A
Recommended input source60 W or higher, per Cudy
Rated output combinationsUp to 2 × 30 W or 4 × 12.95 W, subject to input and line loss
Extender consumptionUp to 2 W
Downlink cable rangeUp to 100 m at Gigabit speed, or 250 m at 10 Mbps in Extend mode, using Cat 5e or better

Control and protection

ControlsVLAN / Default / Extend selector, PoE Watchdog on/off
Electrical protectionPolarity, overvoltage, short circuit and automatic voltage regulation
ESD rating6 kV contact and 8 kV air (IEC/EN 61000-4-2)
RJ45 surge rating4 kV common mode (IEC/EN 61000-4-5)

Installation

MountingDesktop or wall mount
EnclosureMetal
Size119 × 85 × 28 mm
Weight254.5 g
Operating conditions0 to 40 °C and 10–95% relative humidity, non-condensing
Box contentsPOE40 extender, mounting kit and installation guide
Warranty24 months as listed for this offer

Install indoors with a compliant upstream PoE switch or injector. Check each device’s power draw, cabling and required speed before selecting the mode.

Driver & Software Downloads

Use official support resources for this product. Each link opens in a new tab.

Cudy POE40 2.0 installation guide and datasheet

Check that the underside label says POE40 2.0, then choose the English or multilingual installation guide. These documents do not require an operating-system selection.

Open official support (opens in a new tab)
No reviews yetBe the first to review this product.

Reviews

There are no reviews yet.

Be the first to review “Cudy 4 Port Gigabit PoE 1x PoE Input 60W Switch”

Your email address will not be published. Required fields are marked *

WhatsApp