Top of pagePrimary navigation
Flash sale Limited-time prices and current MatzoTech offers Shop offers

Antec FLUX SE E-ATX | ATX | Micro-ATX | ITX Mid-Tower Gaming Chassis Wood Front Panel- Black

0.0 No reviews yet Write a review
SKU: FLUX SE
New Supplier has stock — 10 avail

Antec FLUX SE black mid-tower with walnut and mesh front, five PWM fans, sound-dampening side panels and up to 420 mm front radiator support.

R2,329.00

VAT included · Secure checkout

Supplier has stock — 10 avail

Key product details

Full specifications below
  • Upc: 761345101776
  • Gtin: 761345101776
  • Brand: Antec
Add to wishlist

Delivery & support

Clear fulfilment, warranty and payment details.

  • Availability Supplier has stock — 10 avail Supplier has stock — 10 avail
  • Delivery Nationwide courier delivery or collection from Strand, Cape Town. Courier nationwide or Strand collection
  • Dispatch Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation. Backorder — usually dispatched in 2–3 working days after payment verification, subject to supplier confirmation.
  • Warranty Manufacturer warranty applies where stated on the product page. As stated on this page
  • Returns See our Returns Policy for eligible change-of-mind and faulty goods procedures. See Returns Policy
  • Secure payment PayFast checkout with card, Instant EFT, and Mobicred. PayFast · card · EFT · Mobicred
Ask us a question

Antec FLUX SE · Black airflow mid-tower

Walnut at the front, five fans inside

The FLUX SE pairs a walnut-framed mesh front with two solid, foam-lined side panels. Five pre-installed PWM fans and vents around the power-supply chamber give you starting points for routing air through a full-size build. The removable top bracket lets you assemble the top cooling hardware outside the case.

Black Antec FLUX SE case with solid side panel, walnut-edged mesh front and lower ventilation
5 PWM fansPre-installed with a motherboard-controlled hub
420 mmMaximum front radiator length class
408 mmMaximum graphics-card length

Materials

Walnut and mesh on the same face

The mesh carries air through the front intake. The walnut surround gives the front a warmer finish, and the two tool-free side panels use sound-dampening foam inside.

Airflow

Direct intake below the graphics card

Three front fans feed the main chamber. A reverse fan on the power-supply shroud adds intake lower in the case and a 140 mm rear fan exhausts air. The integrated hub follows the motherboard’s PWM signal. The full-length bottom filter pulls out for cleaning.

Radiators

Build the top assembly outside the case

Mount the top fans or radiator to the removable bracket before lowering it into place. Antec documents a 360 mm front and 360 mm top combination, or a 420 mm front push-pull assembly paired with a 280 mm top radiator. Check your parts against the clearance drawings.

Motherboards and GPU

Choose the board and graphics-card orientation together

The tray takes E-ATX boards up to 330 mm wide, as well as ATX, Micro-ATX and Mini-ITX. Compatible back-connect boards route leads behind the tray. A separate vertical GPU bracket is needed if you use the open removable expansion-slot covers for a vertical card.

Power and ports

Keep the top controls easy to reach

Use the 10 Gbps USB-C port, two USB-A ports and combined audio jack from the front. Leave room for the PSU cables if you keep a hard drive fitted. Included straps and ties help keep surplus cable out of the main chamber.

Specifications

Chassis and fit

ModelFLUX SE
UPC761345101776
ColourBlack with walnut front trim
Form factorMid-tower
MaterialsSteel, plastic, walnut and metal mesh
Side panelsTwo tool-free solid panels with sound-dampening foam
MotherboardsE-ATX up to 330 mm, ATX, Micro-ATX and Mini-ITX; supports compatible back-connect boards
Expansion slots7; vertical mount requires a separate bracket
Graphics cardUp to 408 mm long
CPU air coolerUp to 180 mm high
PSU clearance with HDD installedUp to 235 mm, including cables
PSU includedNo
Case dimensions (D × W × H)484 × 239 × 502 mm
Weight8.8 kg net; 10.3 kg packaged

Cooling

Included fans3 × 120 mm PWM front; 1 × 120 mm reverse PWM on the PSU shroud; 1 × 140 mm PWM rear
Fan controlBuilt-in motherboard-controlled PWM hub
Front fansUp to 3 × 120 mm or 3 × 140 mm
Top fansUp to 3 × 120 mm or 2 × 140 mm
PSU shroud fansUp to 2 × 120 mm or 2 × 140 mm
Rear fans1 × 120 mm or 1 × 140 mm
Front radiator120, 140, 240, 280, 360 or 420 mm
Top radiator120, 140, 240, 280 or 360 mm
Rear radiator120 or 140 mm
FilterFull-length pull-out bottom filter
RGB lightingNone included

Storage, ports and cover

Drive mounts2 shared 3.5-/2.5-inch bays and 1 dedicated 2.5-inch position
Front ports2 × USB-A 3.0; 1 × USB-C 10 Gbps; headphone/mic combo
Front controlsPower and reset
Box contentsChassis with five fitted fans, three hook-and-loop straps, three cable ties and dust plugs
Warranty24 months

Driver & Software Downloads

Use official support resources for this product. Each link opens in a new tab.

No reviews yetBe the first to review this product.

Reviews

There are no reviews yet.

Be the first to review “Antec FLUX SE E-ATX | ATX | Micro-ATX | ITX Mid-Tower Gaming Chassis Wood Front Panel- Black”

Your email address will not be published. Required fields are marked *

WhatsApp